The Performance of the U Shape Double pipe heat exchanger under effect of using Active Techniques.

Authors

  • Muhamad F. Albayati Northern Technical University
  • Rafeq A. Khalefa Northern Technical University

DOI:

https://doi.org/10.56286/ntujet.v1i3.61

Keywords:

active techniques, passive techniques, heat Transfer enhancement, heat exchangers.

Abstract

The main aim from this research experimentally studied the effect of  external power effect like use the active technique which is represented as an air bubble injection on shell side of of U shape double pipe heat exchanger and in this  investigations was used a suitable U shape heat exchanger with different position  angle of the U shape Exchanger like position (U shape , ? Inverse U shape ) in additionally used a system which  has all the equipments  that measuring flow rates and parameters, the vortex generation due to the curvature of bending shell and tube has strong effect to increase the performance of exchanger.  The results with this injection inside the shell side demonstrated  that the optimize position of exchanger with best  performance of  parameter was with (?) Inverse and the exchanger enhancement was (24.4%) due to the different shape of diffuser which was used it with inverse U shape exchanger. the air bubble injection as active technique it suggested that the effect cause by the bubble increment the agitation of flow  and due to the motion of fluid and air as mixing turbulence flow motion and  increased the heat transfer rate and performance  parameter of exchanger .

References

Dizaji, Sadighi. "Heat transfer enhancement due to air bubble injection into a horizontal double pipe heat exchanger." Automotive Science and Engineering 4.4 (2014): 902-910.?

Habeeb, Hussein H., Rafeq A. Khalefa, and Sheren A. Kaska. "Performance Enhancement of the Vertical Double Pipe Heat Exchanger by Applying of Bubbling Generation on the Shell Side." Kirkuk University Journal/Scientific Studies (KUJSS) 13.1 (2018): 156-171.?

El-Said, Emad MS, and M. M. Abou Alsood. "Experimental investigation of air injection effect on the performance of horizontal shell and multi-tube heat exchanger with baffles." Applied Thermal Engineering 134 (2018): 238-247.?

Khorasani, Saleh, and Abdolrahman Dadvand. "Effect of air bubble injection on the performance of a horizontal helical shell and coiled tube heat exchanger: an experimental study." Applied Thermal Engineering 111 (2017): 676-683.?

SINGH, GURPREET, and ABHISHEK NANDAN. "Experimental study of heat transfer rate in a shell and tube heat exchanger with air bubble injection." International Journal of Engineering 29.8 (2016): 1160-1166.?

Singh, Sushil Kumar, Harkirat Sandhu, and Gurpreet Singh Sokhal. "Numerically Investigation on Heat Transfer and Pressure Drop Behavior of MWCNT Nanofluid in MCHS." Indian Journal of Science and Technology 11 (2018): 28.?ProductionEngineering Research and Development (IJMPERD),2017.

Ghashim, Sajida Lafta, and Ayser Muneer Flayh. "Experimental investigation of heat transfer enhancement in heat exchanger due to air bubbles injection." Journal of King Saud University-Engineering Sciences (2020).?

Panahi, D. "Evaluation of Nusselt number and effectiveness for a vertical shell-coiled tube heat exchanger with air bubble injection into shell side." Experimental Heat Transfer 30.3 (2017): 179-191.?

Salman, Ahmed Razzaq Kareem. " experimental study for enhancement of heat transfer by using air bubbles injections inside a shell and coiled tube heat exchanger" (2019).?

Heyhat, Mohammad Mahdi, Adel Abdi, and Ali Jafarzad. "Performance evaluation and exergy analysis of a double pipe heat exchanger under air bubble injection." Applied Thermal Engineering 143 (2018): 582-593.

Ezzat, Akram W., Najdat N. Abdullah, and Sajida Lafta Ghashim. "Effect of air bubbles on heat transfer coefficient in turbulent convection flow." Journal of Engineering 23.1 (2017): 8-28.?

Saffari, Hamid, et al. "The effect of bubble on pressure drop reduction in helical coil." Experimental thermal and fluid science 51 (2013): 251-256.

Kreem, Ahmed R., Ali Baqir, and Hamed Balassim Mahood. "Temperature Distribution Measurements along Helical Coiled Tube Heat Exchanger with Effect of Air Injection." 2019 International Engineering Conference (IEC). IEEE, 2019.

Shah, Ramesh K., and Dusan P. Sekulic. Fundamentals of heat exchanger design. John Wiley & Sons, 2003.

Additional Files

Published

2022-09-09

How to Cite

[1]
M. F. Albayati and R. A. . Khalefa, “The Performance of the U Shape Double pipe heat exchanger under effect of using Active Techniques”., NTU-JET, vol. 1, no. 3, Sep. 2022.

Issue

Section

Articles